Bluetooth Music Receiver is a high performance bluetooth stereo audio receiving device, can be used with bluetooth stereo audio transmitter or laptop bluetooth achieve indoor wireless fidelity audio transmission. Under standard 3.5mm line - out port can be directly connected to the audio line input port, no additional line amplifier, the output level of the sound can reach full power.
Main Features: ● Connect the bluetooth connection by using the device built-in NFC function to touch with H - 266. ● Play music wirelessly from your Bluetooth - capable smartphone, Android, ect. ● Micro usb standard electrical interface, you can use a compatible USB port, including the computer to charge and supply power. ● Standard 3.5mm audio output port , can be easily connected with the speaker input port by audio cable, apply high performance headphone amplifier chip design, make the sound can reach full power output without the extra amplifier.
Model: H - 266
Standard: All in One
Interface: Micro USB, 3.5mm Audio
Input Voltage: 5V
Interface Diameter: 3（Mbps）
Remote Control Distance: 10m
Cable length: USB Cable: 50.5cm, 3.5mm Cable: 51.5cm
Special function: Bluetooth 4.0 ( 2.1+EDR backward compatible ), support A2DP profile.
Dimension and Weight
Product weight: 0.033KG
Package weight: 0.115 KG
Product size (L x W x H): 4.300 x 4.300 x 2.200 cm / 1.693 x 1.693 x 0.866 inches
Package size (L x W x H): 7.200 x 12.300 x 3.500 cm / 2.835 x 4.843 x 1.378 inches
Package Contents: 1 x Bluethooth Music Receiver, 1 x USB Cable, 1 x 3.5mm Audio Cable
Method Of Use:
1. Connect H - 266 with the speaker by the attached 3.5 mm audio cable , the device will start to work automatically, the blue LED lamp flickers quickly which means both devices entering into paring mode, the device starts to work normally.
2. After entering paring mode, open the blutooth function of the devices:
● NFC available, use the device to touch with the H - 266, password input for paring if needed;
● No NFC, search bluetooth device or new device to find H - 266 and connect it, password input for paring if needed, the default password is: 0000.
3. After paring finished , the blue LED lamp will flicker slowly, which means it has connected already. Then user can play music by player.
4. The red light on during the process of charging, when the charging is complete, the red light automatically turns off.